Toggle Nav
DOWEL PULLER KIT
$581.71
Slide hammer type puller removes dowel pins from cylinder heads, blocks, crankshafts, flywheels, etc. Fast and easy.
Availability: In Stock - Ships in 2-3 business days
SKU
KL1575
Slide hammer type puller removes dowel pins from cylinder heads, blocks, crankshafts, flywheels, etc. Fast and easy. Simply mount the correct size collet on the shaft, place over the dowel pin, use a downward motion with the sliding weight to lock the collet and an upward motion to pull the dowel. To release the collet, insert into the release stand and tap downward on the shaft end with a small hammer.
NOTE: Collets and Mandrel are equipped with 1/2 - 20 threads.
| PART # | DESCRIPTION | QTY |
| KL1575A | Sliding Weight | 1 |
| KL1575B | Collet Closer | 1 |
| KL1575C | Release Stand | 1 |
| KL1577 | 1/4" Dowel Puller Collet | 1 |
| KL1578 | 5/16" Dowel Puller Collet | 1 |
| KL1579 | 3/8" Dowel Puller Collet | 1 |
| KL1580 | 7/16" Dowel Puller Collet | 1 |
Replacement and Optional Collets
| Part # | Size | Part# | Size | Part# | Size | Part# | Size |
|---|---|---|---|---|---|---|---|
| KL1576 | 3/16" | KL1581 | 1/2" | KL1583 | 11/16" | KL1591 | 5mm |
| KL1577 | 1/4" | KL1586 | 9/16" | KL1589 | .735 | KL1592 | 6mm |
| KL1578 | 5/16" | KL1587 | 5/8" | KL1584 | 3/4" | KL1594 | 8mm |
| KL1579 | 3/8" | KL1582 | .640 | KL1585 | .800 | KL1595 | 10mm |
| KL1580 | 7/16" | KL1588 | .675 | KL1590 | 4mm | KL1596 | 12mm |
| SKU | KL1575 |
|---|---|
| Service Bulletin | none |